Yield: ± 12 m²/L.

Application temperature: + 8 °C to + 35 °C.

Drying time: 30 minutes to the touch (3 hours between each layer).

Commissioning: 3 days.

PROPERTIES

Durable choice in time.

Penetrates to healthy metal and waterproofs the surface.

Enhances the beauty of the surface.

Long lasting: resistant and flexible film.

Very fluid varnish.

Easy application: no sanding between layers, except before the first.

Can be stained with dyes (consult us). 

DESTINATION

Any metals that may be exposed to rust and metals that have already rusted.

Exterior: poles, chair and scrap furniture ...

Horizontal - vertical.

RECOMMENDATIONS BEFORE APPLICATION

Beforehand, the surface must be clean without any dust and perfectly dry during the application. Sand the rust with a sander if you wish to remove it. Do not apply the varnish in wet weather or late in the afternoon. Do not dilute.

APPLICATION

Apply 3 to 6 coats of varnish depending on the exposure of the substrate. Allow to dry for at least 10 hours between each coat. It is not necessary to sand between layers. Leave to dry for 3 to 4 days before putting into service. Note: Splashes or varnish runs should be removed before the product dries. After drying, the stains are very difficult to remove, so be very careful and remove these stains immediately after application.